HAW562
Surge arrester

HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser
  • HAW562 surge arrester
  • HAW562 surge arrester
  • HAW562 surge arrester
  • HAW562 surge arrester

Surge arrester for DIN rail according to IEC 60715

The HAW562 surge arrester is used to protect electronic components from being destroyed by overvoltage. It ensures that overvoltage surges which occur in signal cables (e.g. 4 to 20 mA), in communication lines (fieldbuses) and in power lines are safely passed into the ground. The functionality of the transmitter or the electronics component to be protected is not affected.

Snelle selectie

Kies uit één van de voorgestelde opties
    -- selected coding
    -- selected label
    <%label%>
    -- selected coding
    -- selected label
    <%feature%>
  • Process Connection
      <%label%>
      <%label%>

  • <%message%>

HAW562
Toon details Verberg details
Toon details
Terug naar snelle selectie
  • <%feature%>
    <%coding%>
    <%label%>
pc
  • Optionele extra's
Gebruik de individuele configurator om verder te gaan.
of

Individuele configuratie

Ga verder met uw keuze uit alle mogelijke opties

Aanvullende componenten

  • Voordelen

    • Investment intensive measuring instruments protected

    • Increased plant availability as surge arrester is perfectly matched to the electronic components involved in process automation and process measuring technology

    • Application in Ex areas - optionally...

  • Toepassingsgebied

    Surge arresters are used to weaken residual currents from upstream lightning protection steps and to limit system-induced or -generated overvoltage surges.

    HAW562 units are primarily used in process automation and in measuring and communication...

Kenmerken en specificaties

Terug

Details

  • Meetprincipe

    Surge arrester

  • Measuring principle

    Surge arrester for DIN rail mounting

  • Function

    Surge arresters are applied to protect electronic components of a plant against overvoltage! Due to this investment intensive measuring instruments are protected and the plant availability is increased.

  • Application

    Surge protection for power supply or signal / communication cables

  • SIL

    2

  • Certificates

    ATEX

    IECEx

    CSA

  • Meetprincipe

    Surge arrester

  • Function

    Surge arrester for DIN rail mounting

    Compact device for an easy ordering (no separation of mounting module and protection module)

    Flexible integration into the measuring chains of the process industry due to approvals according to ATEX & IEC, SIL2 conformity

    compatibility with the established fieldbusses (HART, FF, PA)

    Innovative grounding concept to avoid low-frequency equalizing currents – direct and indirect shield grounding possible in one device

    Uninterruptible operation of the plant due to an automatic resetting after the discharge process

  • Certification

    SIL2 conformity


    CSA

  • Dimensions (wxhxd)

    HAW562-AAA, HAW562-AAD, HAW562-AAE, HAW562-8DA:

    12 x 90 x 72.5 mm

    (0.47" x 3.54" x 2.85")


    HAW562-AAB, HAW562-AAC:

    18 x 90 x 73 mm

    (0.71" x 3.54" x 2.87")

  • Operating Voltage

    24V/60V/230V/5V/12(80)V/24V

Documenten / handleidingen / software

Accessoires / Spare parts

Nr
Order code
Specification

  • 22.06.2020 - 26.06.2020

    With the help of actual hands-on tasks you will learn how PROFIBUS fieldbus technology works in detail. At the end of the course you will be able to design and commission a PROFIBUS fieldbus network.

Vergelijk producten
Wij gebruiken cookies om informatie op uw apparaat op te slaan die ons helpt om uw interactie met ons aan te passen en te verbeteren. Meer over cookies vindt u in het privacybeleid.