iTEMP TMT80
Temperature head transmitter

Product picture temperature head transmitter iTEMP TMT80 ©Endress+Hauser
Product picture temperature head transmitter iTEMP TMT80 with terminal assignment ©Endress+Hauser

Transformation of the sensor signals into stable and standardized output signal for all industries

This transmitter is configurable and supports both selected resistance sensor types and thermocouples. In order to obtain the highest measurement precision, linearization characteristics for every type of sensor are stored in the transmitter.
The standardized output signal used for process measurement is a 4 to 20 mA signal. This offers fast, easy and cost-saving temperature measuring and reliable measurement values for a wide range of non-ex industry applications.

  • Voordelen

    • 2-wire technology, 4 to 20 mA analog output

    • Fault signal on sensor break or short circuit,
      presettable to NAMUR NE 43

    • Meets the EMC requirements as per NAMUR NE 21

    • Galvanic isolation 500 V (input/output)

    • Application specific measuring range setting

  • Toepassingsgebied

    • PC programmable (PCP) temperature head transmitter for converting various input signals into a scalable 4 to 20 mA analog output signal

    • Suitable for resistance thermometer (RTD) and thermocouple (TC)

    • Device configuration using PC with configuration kit...

Kenmerken en specificaties

Terug

Details

  • Meetprincipe

    Head transmitter

  • Input

    1 x RTD, TC

  • Output

    1 x analog 4...20 mA

  • Auxiliary power supply

    8...35 V DC

  • Communication

    PCP (pc-programmable)

  • Installation

    Terminal head form B

  • Accuracy

    (Pt100, -50...250 °C) <= 0,5 K

    (Pt100, -58...482 °F) <= 0,9 °F

  • Galvanic isolation

    yes

Documenten / handleidingen / software

Accessoires / Spare parts

Nr
Order code
Specification
    • Order code

      The unit is not repairable

    • Order code 51001112

      Reservedelenset voor TMT181/187/188/182

      (4 schroeven, 6 veren, 10 veerringen)

    • Order code 51000856

      DIN rail montageclip voor koptransmitter

      Geschikt voor de montage van een temperatuur koptransmitter op DIN rail.

    • Order code TXU10-

      Configuratiekit TXU10

      Set-up software incl. USB- interfacekabel. Dit betreft een product uit het E-direct portfolio waar staffelprijzen aan gekoppeld zijn. Kijk voor meer informatie op www.e-direct.endress.com

    • Order code READWIN-

      ReadWin2000 configuratie/uitleessoftware

      ReadWin2000 configuratie software

    • Order code TAF10-

      Veldbehuizing TAF10

      Geschikt voor alle E+H temperatuur koptransmitters. Gegoten aluminium behuizing IP66. Afmetingen: 100x100x60 mm (bxhxd).