Virtual HART Technology Training

A virtual course, recognized in all industries

You will learn through a video learning path – any time anywhere - how HART technology works in detail. From the physical layer up to the details of the HART protocol.
On the indicated time in a virtual session you get access to hardware to fulfill the practical parts of the training guided by a professional Endress+Hauser instructor.
Register now for the virtual hands-on part and get further information for the video learning path.

Datum

24.10.2023

Tijd

08:30 - 11:30 CEST

Aangeboden taal

Engels

Max. aantal deelnemers

Kosten in lokale valuta

290 CHF

Learn more and sign up

Aanvullende informatie

Inhoud

In the theoretical part the following content is covered:

History of HART communication

Possible ways to establish communication via HART

Point to point, Multidrop, Multiplexer, Remote I/O, Handheld

Frequency shift keying technology

- Device addressing and range

HART commands and structure

HART telegram

HART revisions 5,6,and 7

Difference between the revisions

In the practical part the following content is covered:
Virtual Commissioning

Able to wire up an individual field device point to point

Able to wire up field devices in multidrop

Able to configure HART device using FieldCare (FDT/DTM technology)

Able to establish communication to the HART device via MultiPlexer and PROFIBUS Remote I/O

Able to integrate a field device into a DCS at a very basic level, reading out PVs via HART

Virtual Maintenance

Able to connect HART handheld to device, reading out diagnostic (NE107)

Able to make appropriate suggestions about improving a customer`s physical layer

Doelstellingen

At the end of the course you know different ways of using HART technology and able to design and commission a HART fieldbus network.

You will also understand the benefits of the technology and know the procedure for troubleshooting.

Voorwaarden

Basic knowledge of electronics and ability to use a computer.

Kwalificatie

The training is Endress+Hauser certified.

Evaluatiemethode

Theory: video-based modules - anytime anywhere
Practical: virtual based hands-on – remote access to hardware, guided by an instructor.

Who should attend?

Technicians/Maintenance Technician

Service/Support Specialists

Supervisors

Programmers/Device Configurators

Engineers

Contact

Endress+Hauser Process Solutions AG

Christoph Merian-Ring 12
CH-4153 Reinach
Zwitserland
- E-mail
- +41 (0) 61 715 73 78
- E-mail
- Bellen